675 reviews analysed
1. Control Devices VR Series Brass Vacuum Relief Valve, 0-30" Hg Vacuum Range, 3/8" Male NPT
Description
This Control Devices VR38-100 vacuum relief valve has a brass body, an adjustable relief pressure, and a 3/8″ male NPT threaded inlet connection. The valve’s brass body, stainless steel spring, nylon poppet, and Nitrile seal resist corrosion and can be used in operating temperatures up to 250 degrees F. This proportional-type relief valve opens at a rate relative to the increase in vacuum pressure, and can be adjusted to open between 0 and 30″ Hg (inches of mercury) using the knurled adjustment screw and locking jam nut. The valve is factory preset to open at 20 pounds per square inch (psi) and has a flow rate of 5 cubic feet per minute (CFM). This vacuum relief valve is suitable for use in vacuum applications such as to prevent a tank from collapsing while it is being emptied or after a sterilization-in-place (SIP) procedure.
Relief valves remove excess pressure or vacuum from a system. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation.
Control Devices manufactures valves and other flow control devices. The company, founded in 1963, is headquartered in Fenton, MO.
2. PHILIPS D1S Bulbs 85415C1 35W DOT OEM 4300K Germany by ALI – Pack of 2
Feature
- Model# 85415C1 – 100% New & Authentic PHILIPS Made in Germany – Pack of 2 (PAIR)
- D1S – Newest release – PHILIPS XenStart 85415C1 D1S – w/ Authenticity Security Label | Normally goes for over $150 per bulb at dealer | DOT approved, 100% legal for On/Off road use | replace in pairs for optimal performance
- OEM 4300K, 3200lm, Direct replacement – D1S 35W | Made in Germany | Light Color: Standard OEM 4300K Color temp (Standard White) | If you need cooler color temp, look for 5000K or higher | Note: All HID lights discolor to get whiter/bluer over usage & dims down. When comparing this NEW bulb against your OLD bulb, the NEW bulb may look warmer in color, which is normal. Replacing in PAIR is suggested.
- Extremely Long Life with precise light distribution & consistent performance | DOT approved, 100% legal for On/Off road use | replace in pairs for optimal performance
- This bulb includes Security label that you can check authenticity. If you want different form of authenticity label such as COA (Certificate of Authenticity), please check our other listing as we also offer it at higher price. Please do not mistakenly order this and complain for different label/sticker. Friendly note: When you have light failure, try working side bulb on non-working side to double-check it’s the bulb you need to replace not controller module issue.
Description
85415C1 – Newest Release! PHILIPS HID (High Intensity Discharge) Lamp 35W D1S made in Germany – (Pack of 2); This is original factory D1S HID/Xenon replacement headlight/headlamp bulb with model# 85415C1. It can replace any D1S bulb even different branded D1S bulb. ///***Please note that we strongly recommend replacing both two bulbs at the same time in order to get even lighting output and color as all HID light bulbs do discolor to become bluer & whiter over usage and also get dimmer at the same time. Otherwise, replacing only one side with new bulb and having old bulb on the other side will give you un-even lighting color and brightness./// *** This is 100% authentic PHILIPS product made in Germany in real PHILIPS packaging box w/ security label. It’s not the replica/copy version that are sold for $20 ea. *** Please do not use our bulb for trouble-shooting. Only order if you are certain that this is what you need. If you are not sure, please ask first. ***
3. Dorman 911-281 Vapor Canister Purge Valve for Select Ford/Lincoln/Mercury Models
Feature
- Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment quality at a lower price
- Quality tested – has undergone testing to ensure proper fit and performance
- Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
Description
Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.
4. Standard Motor Products VS63 EGR EGR Vacuum Solenoid Valve
5. Zurn 34-720A Wilkins Pressure Vacuum Breaker 3/4-Inch Assembly
Feature
- Maximum working water pressure 150 PSI
- Maximum working water temperature 110 DegreeF
- Hydrostatic test pressure 300 PSI
- End connections threaded ANSI B1.20.1
- All bronze body and bonnet construction
- Standards Compliance: ASSE Listed 1020, IAPMO Listed, CSA Certified
- Main valve body: Cast Bronze ASTM B584
- Fasteners: Stainless Steel, 300 Series
- Elastomers: Silicone (FDA approved), Buna Nitrile (FDA approved)
- Polymers: Polypropylene (FDA approved), Delran (FDA approved)
6. American Valve MVB 3/4" Hose Connection Vacuum Breaker
Description
The American Valve MVB is a brass vacuum breaker that protects against the flow of polluted water back into the potable water supply. It contains a manual freeze relief feature to protect the valve during freezing conditions. This valve is not intended to convey water for human consumption.
Conclusion
By our suggestions above, we hope that you can found Vacuum Breaker Valve For A Mercury Outboard Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!
