Nowadays, there are so many products of range sensor arduino in the market and you are wondering to choose a best one.You have searched for range sensor arduino in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings range sensor arduino which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
859 reviews analysed
1. SainSmart HC-SR04 Ranging Detector Mod Distance Sensor (Blue)
Feature
- Using IO trigger for at least 10us high level signal
- The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back
- IF the signal back, through high level ,time of high output IO duration is the time from sending ultrasonic to returning. Test distance = (high level time velocity of sound (340M/S) /2
- Power supply :5V DC, quiescent current : <
- 2mA,effectualangle: <
- 15 ranging distance : 2cm~500 cm resolution : 0.3 cm
Description
SainSmart There are 4 pins out of the module: VCC , Trig, Echo, GND . So it’s a very easy interface for controller to use it ranging. The all process is : pull the Trig pin to high level for more than 10us impulse , the module start ranging ; finish ranging , If you find an object in front , Echo pin will be high level , and based on the different distance, it will take the different duration of high level. So we can calculated the distance easily : Distance = ((Duration of high level)*(Sonic : 340m/s))/2
2. ELEGOO 5PCS HC-SR04 Ultrasonic Module Distance Sensor for Arduino UNO MEGA2560 Nano Robot XBee ZigBee
Feature
- Ultrasonic hc-sr04 distance measuring transducer sensor
- HC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object.
- ~Power supply: 5V DC
- quiescent current: less than 2mA
- effectual angle: less than 15°
- distance: 2cm500cm
- resolution: 0. 3 cm~
- Package Content: 5pcs HC-SR04 with a little gift
3. 2pcs Ultrasonic Module HC-SR04 Distance Sensor with 2pcs Mounting Bracket for Arduino Uno R3 Mega 2560 Nano Raspberry Pi 3 Smart Robotics Projects
Feature
- HC-SR04 Ultrasonic Sensor Distance Module:using IO trigger for at least 10us high level signal.
- The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back.
- If the signal back,through high level,time of high output IO duration is the time from sending ultrasonic to returning.Test distance = (high level time velocity of sound (340M/S)/2.
- Power Supply:5V DC
- Quiescent Current:<
- 2mA
- Effectual Angle:<
- 15°
- Ranging Distance:2cm~450cm
- Resolution:0.3 cm,Module precision:blind spots (2cm)-SUPER CLOSE.
- The module performance is stable,measure distance accurately.SRF05,SRF02 ultrasonic ranging module comparable.This module is compatible with GH-311 anti-theft module.
Description
The Xiao R Geek HC-SR04 Ultrasonic Distance Measuring Sensor Module includes an ultrasonic transmitter,receiver and circuits.It has 4 pins:VCC,TRIG,ECHO and GND.The anti-reverse pin header onside makes it easy to connect and apply.
Parameters:
1.Use voltage:DC5V
2.Quiescent current:less than 2mA
3.Level output:high 5V low 0V
5.Induction angle:no more than 15 degrees
6.Detection range:0.78~177 in/(2cm~500cm)
7.High accuracy:up to 0.12 in/(0.3 cm)
8.Connection mode:VCC,trig(control),echo(receiving end),GND ground wire
Module working principle:
Pull the Trig pin to high level for more than 10us impulse,the module start ranging.
The module automatically sends eight 40KHz square wave to detect whether a signal is returned.
Finished ranging,If you find an object in front, Echo pin will be high level,and based on the different distance,it will take the different duration of high level.
So we can calculated the distance easily.The distance=((Duration of high level)*(Sonic :340m/s))/2
Package includes:
2*HC-SR04 Ultrasonic Distance Sensor
2*HC-SR04 Mounting Bracket
Male to Femal jump wires 8pin
4. 5PCS RCWL-0516 Motion Detection Sensor, Microwave Radar Sensor, Switch Module, for Arduino ESP8266 Nodemcu Wemos, for Human Rat Cat Detector, Detection Distance 5-7m, Better Than HC-SR501
Feature
- Feature: The module has the characteristics of high sensitivity, high induction distance, high reliability, large induction angle, wide power supply voltage range, etc. it is widely used in various kinds of human body induction lighting and alarm and so on
- Works with Nodemcu Document link: https://github.com/jxmot/ESP8266-RCWL0516#rcwl0516-details
- Works with Arduino Document link : https://www.hackster.io/remnis/coolest-motion-detection-sensor-ever-d2d688
- It can work with (for) arduino/nodemcu/wemos etc.
- It can detect human, cat, rat, water
- What you will get: 5pcs RCWL-0516 Module, 5pcs 4P bend pin header, one year warranty
Description
Description:
Wide operating voltage range: 4-28V
Can output 3.3V power supply
Blocking time, adjustable distance
Using special signal processing control chip RCWL-9196
Compared with the traditional infrared induction PIR, the penetration detection ability
About pin header:
CDS = No connection
VIN = 5vdc (+) (9v battery also Ok)
OUT = 3.3vdc signal out when triggered
GND = 0vdc (-)
3V3 = No connection (in most applications)
C-TM: Adjust repeat trigger time (default 2 s). Adding a capacitor will give a longer repeat trigger time.
R-GN: Detection distance adjustment (default 7 m). Adding a resistor the detection distance will become shorter. If connected with a 1-MΩ resistor, detection range is about 5 m.
R-CDS: By adding a resistor (in parallel with the internal 1-MΩ resistor), user can change the light detection threshold as per individual requirement. This is applicable only when a light sensor is soldered in its pads (CDS) on the front of the circuit board. A 47–100K resistor works fine with standard 5-mm LDRs
Package Includes:
5 X RCWL-0516 Module Microwave Radar Sensor
5 X 4P Bend Pin Headers
FAQ:
Q: Can you use the RCWL-0516 with an ESP8266? Or will you get random false positive results?
A: I’ve done a short term test with the ESP8266 on a NodeMCU board. It seems to work just fine. The ESP greater Version 12-E is shielded and is FCC certified. So it should, by definition, not interfere with other electronics. However, one viewer reported random false positive results on a long shot.
Q: Is the water in the human body responsible for the detection?
A: Probably. I tested it with one empty and one water filled bottle. And even with a cat. And it seems that the bigger the object the further away it can be detected.
5. WYPH Ultrasonic Module HC-SR04 Distance Measuring Ranging Sensor for Arduino UNO Mega R3 Mega2560 Duemilanove Nano Robot Pack of 10pcs
Feature
- Using IO trigger for at least 10us high level signal
- The module automatically sends eight 40 kHz and detect whether there is a pulse signal back
- If the signal back, through high level ,time of high output IO duration is the time from sending ultrasonic to returning. Test distance = (high level time velocity of sound (340M/S) /2
- Power supply :5V DC, quiescent current : <
- 2mA,effectualangle: <
- 15 ranging distance : 2cm~500 cm resolution : 0.3 cm
- Package Content: 10pcs HC-SR04
Description
There are 4 pins out of the module: VCC , Trig, Echo, GND. So it’s a very easy interface for controller to use it ranging.
The all process is: pull the Trig pin to high level for more than 10us impulse, the module start ranging;
Finish ranging, If you find an object in front, Echo pin will be high level, and based on the different distance, it will take the different duration of high level.
So we can calculated the distance easily: Distance = ((Duration of high level)*(Sonic :340m/s))/2
6. Excelity 3pcs Ultrasonic Module HC-SR04 Distance Sensor with 3pcs Mounting Bracket for Arduino
Feature
- [PACKAGE INCLUDED] 3pcs HC-SR04 distance measurement module & 3pcs mounting bracket for installation
- [FEATURE] These module is for distance measuring transducer that working with ultrasonic, they consist of ultrasonic transmitter, receiver, and control circui
- [FUNCTIONAL PARAMETER] Effectual Angle: <
- 15 degree
- Detection Distance : 2cm~450 cm
- Resolution : 0.3 cm. Power Supply : 5V DC
- Quiescent Current : <
- 2mA
- [UNIVERSAL COMPATIBILITY] Built in standard interface that can be controlled directly by microcontroller，such as Arduino , 8051, AVR, also comply with Arduino library
- [WORKING PRINCIPLE] Using IO trigger for at least 10us high level signal, when triggered it sends out a series of 40KHz ultrasonic pulses and receives echo from an object, the duration of the signal is the time from sending ultrasonic to returning.The distance = (duration time * sound velocity (340M/S) / 2
Description
Excelity HC-SR04 Ultrasonic Moudle is to measure the distance of object by 40KHz ultrasonic sound wave. This moulde provides 2cm-400cm non-contact measurement function, the ranging accuracy can reach to 3mm. It is great for the project that need distance measurement, such as Distometer,intelligent robot navigation system,etc.
Module main technical parameters:
-Working Voltage : 5V(DC) -Static current: Less than 2mA
-Output signal: Electric frequency signal, high level 5V, low level 0V -Sensor angle: Not more than 15 degrees
-Detection distance: 2cm-450cm. -High precision: Up to 0.3cm
-Input trigger signal: 10us TTL impulse -Echo signal : output TTL PWL signal
Pin definition:
-VCC: connect to 5V DC -Trig(T): control pin, connect to a standard I/O port
-Echo(R):receiving end, connect to a standard I/O port -GND: Connect to Ground
Notes:
-1. The module should be inserted in the circuit before been powered to avoid producing high level of misoperation; if producted, power it again. -2. Before connect to VCC terminal, the GND terminal should be connected the module first,otherwise,it will affect the normal work of the module.
Module Working Principle:
-1. Pull the Trig pin to high level for more than 10us impulse, the module start ranging. -2. The module automatically sends eight 40KHz square wave to detect whether a signal is returned.
-3. Finished ranging, If you find an object in front, Echo pin will be high level, and based on the different distance, it will take the different duration of high level. -4. Calculated the distance, the distance = (high level time * sound velocity (340M/S) / 2.
Package included:
-3pcs HC-SR04 Moulde -3pcs Mounting Bracket
7. SunFounder Ultrasonic Module HC-SR04 Distance Sensor for Arduino R3 Mega2560 Duemilanove Nano Robot Rapsberry Pi 4B 3B+, 3B, 2 Model B & 1 Model B+
Feature
- Ultrasonic hc-sr04 distance measuring transducer sensor, it consists of ultrasonic transmitter, receiver, and control circuit.
- HC-SR04 Ultrasonic Sensor Distance Module: using IO trigger for at least 10us high level signal，When triggered it sends out a series of 40KHz ultrasonic pulses and receives echo from an object.
- Hc-sr04 Test Distance following formula: L = 1/2 × T × C ( L is the distance, T is the time between the emission and reception, and C is the sonic speed)
- Power Supply : 5V DC
- Quiescent Current : <
- 2mA,
- Effectual Angle: <
- 15°
- Detection Distance : 2cm~450 cm
- Resolution : 0.3 cm
- Package Content: 5 HC-SR04 Ultrasonic Sensors , 10 Female-Male Dupont Cables , 10 Female-Female Dupont Cables , 1 Exquisite package box
8. Smraza 5pcs Ultrasonic Module HC-SR04 Distance Sensor with 2pcs Mounting Bracket for Arduino R3 MEGA Mega2560 Duemilanove Nano Robot XBee ZigBee
Feature
- Test mode :Using IO trigger for high level signal.( Not less that 10us),The Module sends eight 40 kHz automatically and detect whether there is a pulse signal back.
- The detection zone: 0.78~196 in/ (2cm~500cm)
- High precision: up to 0.12 in/(0.3 cm) Effectual angle: less than 15°
- Power supply: 5V DC
- Quiescent current: less than 2mA.
- Test distance = ((Duration of high level)*(Sonic :340m/s))/2
- Package included: 5pcs HC-SR04+ 2pcs Mounting Bracket(support HC-SR04 only)
9. Gikfun 20A Range Current Sensor ACS712 Module for Arduino (Pack of 2pcs) EK1181x2
10. WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino
Feature
- 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects.
- 【Current Sensor Module】Chip: ACS712ELC-30A
- Pin 5V power supply, on-board power indicator
- The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A.
- 【Voltage Sensor Module】Voltage input range: DC0-25V
- Voltage detection range: DC0.02445V-25V
- Voltage Analog Resolution: 0.00489V
- DC input connector: Terminal cathode connected to VCC, GND negative pole
- Output interface: “+” then 5/3.3V, “-” then GND, “s” then the Arduino AD pins.
- 【Document Link】https://www.instructables.com/id/Arduino-Voltage-Sensor-0-25V
- https://www.codrey.com/arduino-projects/acs712-an-introduction/
- 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor
Description
WayinTop: Your Top Way to Inspiration.
Voltage Sensor Module:
– Voltage input range: DC0-25V
– Voltage detection range: DC0.02445V-25V
– Voltage Analog Resolution: 0.00489V
– DC input connector: Terminal cathode connected to VCC, GND negative pole
– Output interface: “+” then 5/3.3V, “-” then GND, “s” then the Arduino AD pins
Current Sensor Module:
– The current sensor chips: ACS712ELC
– Current Range: 30A
– Pin 5V power supply, on-board power indicator;
– The module can measure the positive and negative 30 amps, corresponding to the analog output 66mV / A;
– No test current through the output voltage is VCC / 2;
– Note: ACS712 is based on the principle of the Hall test, please use this field to avoid impact
Package Included:
2 x ACS712 30A Current Sensor Module
2 x DC0-25V Voltage Tester Terminal Sensor
Conclusion
By our suggestions above, we hope that you can found Range Sensor Arduino for you.Please don’t forget to share your experience by comment in this post. Thank you!
