The Best Laptop Hard Drive Adapter With Write Blocker

The EZ-Clone USI-2535CLU3 is a USB 3. 0 to Dual-SATA & Single-IDE Hard Drive Adapter that also works as a standalone disk-cloning duplicator. The EZ-Clone adapter provides support for two SATA (SSD or HDD) drives and one IDE hard drive in 2. 5″ or 3. 5″ form factors. Access up to two external drives at the same time (two SATA drives or one IDE and one SATA drive) when connected to the PC. The EZ-Clone also works as a standalone disk duplicator (IDE to SATA, or SATA to SATA) while disconnected to the PC. Easy to Connect Connecting the external drives is simple and easy. The EZ-Clone adapter comes with following drive interface: IDE Source – for connecting a 3. 5″ IDE drive. SATA1 Source – for connecting a 3. 5″ or 2. 5″ SATA drive. SATA2 Target – for connecting a second 3. 5″ or 2. 5″ SATA drive. Another unique feature of the EZ-Clone is the stand-alone disk cloning feature that allows you to duplicate or clone the entire IDE or SATA source drive to another faster or larger SATA drive without having to connect to a computer. Simply attached the IDE or SATA source drive and the new SATA drive to the SATA2 Target connector, then turn on the EZ-Clone power and press the CLONE button for 3 seconds to begin the cloning process. The EZ-Clone has 4 progress LEDs (25%, 50%, 75%, 100%) that will turn blue to indicate the completed percentage of the clone process. The result is two identical drives containing the same files, boot sector, partition table and file system format. If the target drive is larger than the source drive, the remaining partition of the drive that was not used during the cloning process will be converted as an unallocated partition. You can still repartition and format that partition as extra logical drive.

Feature:

1. Super-Speed USB 3.0 interface, Reverse compatible with USB 2.0 and USB 1.1. LED lights indicate Power and Activity status.
2. On/Off Switch for HDD protection, can be switched off when not in use, easy and simple operation, efficiently enhances lifespan of your devices it can protect your HDD.
3. Support Standard Desktop 3.5″ SATA or IDE Hard Drives, Standard Notebook 2.5″ SATA or IDE Hard Drives, Desktop CD-ROM/CD-R/CD-RW/DVD-ROM/DVD+RW.
4. Hot-swappable, plug and play, no drivers needed.
5. The USB SATA Adapter is a caseless solution that makes swapping hard drives easier than ever before. Transfer data quickly and easily through USB 3.0 at speeds of up to 5Gbps.

System Requirements:
– Available USB port on the computer.
– Windows: 2000/XP/Vista/7/8/8.1/10 (Both 32-bit and 64-bit versions).
– Mac OS X.

Package Include:
1x USB 3.0 to IDE/SATA Adapter
1x USB 3.0 CABLE
1x 4PIN Power Cable
1x 12V/3A Power Adapter
1x User Manual

This adapter is designed as universal compatibility. It supports 2.5” 3.5” SATA HDD/ SDD, and 2.5” 3.5” IDE HDD. Also, it can works with DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. You can enjoy much convenience via USB 3.0 Port at the speed up to 5Gbps (actual speed depends on the capability of your device), and it is also compatible with USB 2.0/1.1. With USB 3.0 interface, high speed transfer rate up to 5Gbps, which can provides faster write & read speed than traditional USB 2.0.

Compatible Hard Drives:

• 2.5” 3.5” SATA HDD/ SDD
• 2.5” 3.5” IDE HDD
• DVD-ROM
• CD-ROM
• CD-RW
• DVD-RW
• DVD+RW

Compatible Computer System: windows 7,8,10, vista, XP; Mac OS, 9,10; LINUX

Compatible USB Port: USB 3.0, USB 2.0, USB 1.1

Huge Capacity: 5TB

Maximum Transfer Speed: 5Gbps (actual speed depends on the capability of your device) With USB 3.0 interface, high speed transfer rate up to 5Gbps, which can provides faster write & read speed than traditional USB 2.0.

Power Supply: 12V DC

Package Including:

1x USB to SATA/ IDE adapter

1x power cord

1x IDE cable

1x USB cable

WEme USB 3.0 to SATA adapter allows you to connect any 2.5 or 3.5 SATA drive to your computer for faster data transferring. For back up, move or archive your laptop or computer’s HDD files quickly and easily, such as iMac, Macbook Air, Microsoft Surface Pro, ultrabooks and so on.

Super-fast USB 3.0 data transfer rates ensure file transfers speeds up to 5Gbps in minimal time. SATA III transfer rate up to 6Gbps.

Specification:
Output interface: USB 3.0/2.0/1.1
Power input: 100-240V, 50/60Hz
Output: DC 12V/2A
Power Cable Length: 1.5Meters
USB Cable Length: 1.2 Meters
LED Lights indicates Power and Activity Status.

HDD Compatible: All 2.5″ / 3.5″, 9.5mm / 12.5mm SATA-I, SATA-II, SATA-III / SSD. Perfectly compatible with HDD from Seagate/ WD / HGST etc, and SSD from Intel/ Samsung/ Toshiba/ Jmicron etc. Max capacity up to 16TB.

System Compatibility: Windows, MacOS, Linux OS.

Packing Contents:
– 1 x USB 3.0 to SATA Adapter Cable
– 1 x USB 3.0 Micro B male to A male cable
– 1 x 12V2A Power Adapter

Note:
– When connect the3.5 inch HDD/SDD, please make sure to power the product with the provided AC power adapter to ensure a stable operation.
– This hard drive reader is for SATA hard drives (2.5″ 3.5″ HHD SSD), CAN’T read IDE hard drives.

Questions:
Q: PC prompts that the USB Device Not Recognized?
A: Please try with another computer or usb device. Unplug&plug the USB cable or restart the PC.
Q: The hard drive does not show up under Windows Explorer?
A: Go to Disk management, right-click the ‘Unallocated’ or ‘Free space’ and select the New Simple Volume option. Then assign the drive letter for the disk.

WEme USB 3.0 to SATA/IDE hard drive converter is a perfect solution for data transfer and backup in the 2.5″/3.5″ hard drive. This item lets you swap hard drives easier than ever before as it ensures stable external connection between any 2.5″ or 3.5″ SATA Hard Drive. Using its USB 3.0 Interface, you can connect any 2.5″ or 3.5″ SATA/IDE drive to your Ultrabook Notebook Mac or PC, and experience blistering file transfers as fast as 5Gbps speed.

Product Features:
– Compatible with USB 3.0 computer systems such as Mac & MacBook & Lenovo & Dell Optiplex & Asus & Samsung ect
– Supported Drives: 2.5″/3.5″ SATA HDD/SSD, 2.5″/3.5″ IDE HDD, CD-ROM, CD-RW, DVD-ROM, DVD+RW, DVD-RW. Supports up to 10 TB drives
– Supports most models of CD/DVD-ROM/RM drives comprising of an IDE or SATA interface on the market
– On/Off Switch for HDD protection, you can be switched off when not in using
– Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector
– One-click backup feature to effectively secure precious data
– Support 2 IDE hard drives and 1 SATA hard drive connecting simultaneously. Compatible with three hard drives simultaneously!

Compatible Operating Systems:
Windows XP /Vista/7/ 8 /8.1 (32/64-bit), Win 10, Mac OS 10.10 or higher

Note:
1. OTB (One Touch Backup) function isn’t applicable for Mac OS, only be used on usb connection under Windows system.
2. When connecting to a 3.5-inch HDD/SDD, please power the product with the provided AC adapter to ensure the stable operation.
3. Some components inside this hard drive may be broken along with the aging problem, this may lead to automatically disconnected when transferring large files.

Package Content:
– 1 x USB 3.0 to SATA/IDE Adapter
– 1 x USB 3.0 Cable
– 1 x 4PIN Power Cable
– 1 x Power Adapter
– 1 x CD Driver

The USB 3.0 to SATA/IDE Hard Drive adapter enables you to transfer files up to 5 Gbps! Connect any 2.5″ and 3.5″ SATA/IDE hard drives and 5.25″ SATA/IDE CD/DVD-RW drives. Power switch to easily connect and disconnect your hard drive.This Adapter is a perfect solution for data transfers or data backup!

Features:

• Supports 2.5″ and 3.5″ SATA/IDE hard drives

• Supports 5.25″ SATA/IDE CD/DVD-RW drives

• Super-Speed USB 3.0 interface

• Plug & Play, Hot-Swappable

• LED indicator light

System requirements:

• Windows

• Mac OS

Package contents:

• USB 3.0 to SATA/IDE adapter

• Power Adapter

• Power Cord

• User Manual