Top 9 Hurr Pro Hurricane Clips

PATENT-PENDING UNIVERSAL 1/2″ TO 3/4″ ONE SIZE FITS ALL HURR-PRO WINDOW HURRICANE PROTECTION CLIPS – FOR PEACE OF MIND DURING STORMS OR HURRICANES

• Patent Pending Box Clip Style Universal 1/2″ to 3/4″ Hurricane Clips. 24-PACK. Prepare for Hurricane Season well in advance with our Universal HURR-PRO window protection clips. One size fits all plywood thicknesses (1/2″, 5/8″ and 3/4″, and any thickness variation of these due to swelling or thinning of the plywood or board). 

• These ingeniously designed patent pending Stainless Steel hurricane clips use the box spring clip principle for easy adjustment to various plywood thicknesses up to 3/4″. Securely mount plywood boards to the exterior BRICK window casings of your home, without the use of any tools. Typically using 4 clips per window, you can protect 6 windows with this 24-pack. 

• Rugged and Rust-Proof Stainless Steel, inexpensive, easy to use, non-destructive to your home and also reusable year after year! You do not need any special tools, caulking, adhesives or glue to attach.

• Insurance Companies requires Stainles Steel clips for all outdoors Storm protection systems; we are one of the few manufacturers in compliance with these regulations. 

• Get your HURR-PRO HURRICANE CLIPS today and have the secure feeling of preparedness during Hurricane Season.

HurriClip hurricane safety clips are made of strong carbon steel. Simply slide the clips onto your plywood, typically 4 clips per sheet (depending on the size of your window), push the plywood into the window casing and you are DONE! Once the hurricane has passed, loosen the tension on the serrated part of the clip and pull the plywood sheet out of the window. Remove the clips, place in the provided bag and store until you need them again!

These Hurricane Board-Up Clips are constructed of stamped steel and come in a zinc-plated finish. They are designed for fast and secure board-ups over windows on brick, wood and stucco surroundings that are sufficiently recessed in from the exterior finished surface, with 90-degree right angle surfaces adjacent to the windows for them to work. These clips help provide swift shielding of windows from high winds and dangerous airborne debris. Installation instructions are provided for use with 1/2 in. thick plywood, to include mounting and removal for storage and future use. Kindly refer to the Wind Speed Chart for proper count and spacing of clips to be used, based on wind speed and overall window sizes. The chart covers window sizes ranging from 24 to 96-inches wide, and for wind speeds up to 110-150mph. , all depending on overall window size opening.

HurriClip hurricane safety clips are made of strong carbon steel. Simply slide the clips onto your plywood, typically 4 clips per sheet (depending on the size of your window), push the plywood into the window casing and you are DONE! Once the hurricane has passed, loosen the tension on the serrated part of the clip and pull the plywood sheet out of the window. Remove the clips, place in the provided bag and store until you need them again!

These clips are different from other clips because they are made from spring grade high carbon steel which improves performance by retaining their original shape better than others that can get bent and twisted during use.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Using Window Clips To help ease the process and to cut time, there is a product available that can make boarding easier and more effective: HURRICANECLIP window clips. Some facts about window clips:Available in a variety of economical package sizes and quantities.Clips securely attach to 1/2″ plywood which the fits into exterior window casings. No special tools, caulking, adhesives or glue required. Install and remove with one person.Clips create rigid, safe, temporary attachment of plywood to brick, wood, or stucco window casings. No nails, screws, bolts or brackets will permanently damage your property.Clips require no drilling into your home or window casingsClips hold plywood sheets in window casings as well or better than any hardware available today.Clips are rugged and will last year after year. If you move, take them with you. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. You can adjust the number of clips used toaccount for different shapes and sizes of windows. Note: The new design will keep the clips on place even for thinner plywood. For additional stability – use small screw or nail to keep the clips in place when installing it to a board. Or you can use a pliers to tighten the opening of the clip to make it more secure.