Normally Closed Type. Voltage: DC 12V. Thread Size : 1/2″ G. Working Temperature : 32-176°F ,Working Pressure : 0.02~0.8Mpa
The electric solenoid valve is made of high quality plastic and brass material, with long serving life .
If your central heating or irrigation sprinkler system isn’t working correctly it could be down to the solenoid valve. Repair a faulty valve with this brand new, fast acting 12V DC diaphragm-style replacement.
2. Ximimark 2Pcs 1/2" Thread Plastic Electric Solenoid Valve Water Inlet Flow Switch Magnetic Water Air Normally Closed Tools DC 12V N/C 0.02 to 0.8mpa
The valve body is made of all-plastic material, with 4 points of external thread on both ends of the valve body. The valve body is simple, the power terminal is insert type, and the 6.3 spring is used.
The coil is packaged by the international top-grade coil packaging material, and has the advantages of waterproof, moisture-proof, wear-resistant, corrosion-resistant, high-low temperature resistance.
The insulation grade is high and the heat dissipation effect is good. Under normal conditions, the product can be used for a long time.
This valve is a normally closed solenoid valve, that is, it is energized to turn on (water), and the power is off (water cut).
This is a micro pressure valve (pressure), suitable for 0.02-0.8MPA water pressure, please choose according to your actual needs.
Description
Specifications: Rated power: 5W, no need to divide the positive and negative poles Working mode: quota system (that is, intermittent cycle work system, the longest continuous work for about 4 hours, can continue to work after stopping for ten minutes, there will be danger of burning coils for more than four hours) Use fluid: (0-100 ° C) water Flow characteristics of water: 0.02Mpa>1.5L/min; 0.10Mpa>7L/min; 0.30Mpa>12L/min; 0.80Mpa>20L/min Insulation performance: The insulation resistance between the conductor and the non-conductor is greater than 100MΩ Insulation class: Class E insulation Service life: ≥500,000 times (laboratory data), ≥300,000 times (actual normal use) Valve type: diaphragm (operated by Servo) Usage: water and low viscosity fluids Material: metal + plastic External thread diameter: approx. 20mm Screw hole pitch:25mm Size: approx. 84 x 57mm (L x H) Coil size: approx. 34 x 23mm (W x H) Unit conversion: 1mm=0.039inch
Note: Manual measurement, with small error. Please check size in detail before purchase. Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.
We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
Package Includes: 2Pcs
3. HFS 110v Ac or 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c – 1/4", 1/2", 3/4", 1" NPT Available (110V AC 1/2" NPT)
This 110V AC brass electric solenoid valve easily replaces broken valves for use with water, air, an
Durable brass construction and a quality copper solenoid are made to last. 1/2″NPT
This valve is N/C (normally closed), meaning it is closed when power isn’t supplied.
The unit operates on 110V AC power and can withstand temperatures of 23F to 176F. This unit fits a 1
We have solenoids available in AC/DC and various size NPT threads as well
Description
Pattern Name:110V AC 1/2″ NPT
This 110V AC brass electric solenoid valve easily replaces broken valves for use with water, air, and other low viscosity fluids. Durable brass construction and a quality copper solenoid are made to last. This valve is N/C (normally closed), meaning it is closed when power isn’t supplied. The unit operates on 110V AC power and can withstand temperatures of 23F to 176F. This unit fits a 1/2″ NPT thread.
We have solenoids available in AC/DC and various size NPT threads as well.
SPECIFICATIONS: 110V AC Working Pressure: 0-100PSI (7Bar) Normally Closed (Opens when powered) Semi-Direct lift valve. Suitable for gravity feed. Temperature Range: 23F to 176F Orifice: 16mm Length: 2-3/8″ Width: 2″ Height: 4″ 1/2″NPT Both Ends
WARNING: Not for use with flammable gas or liquid. This valve is NOT explosion proof.
4. 1/2" Stainless Steel Electric Solenoid Valve 12V DC Normally Closed
Working temperature range: 23-176°F；Pressure range：0-145Psi
This valve’s body is made of solid brass (very corrosion resistant material).
It’s applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.)
7. AOMAG 1/8" NPT DC 12V Electric Solenoid Valve 2 Way Water Air Valve Normally Closed
【Service Media】: Air, Gas, Liquid, Water 【Material】Anodized Aluminum
【Valve Type】2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing.
【Port Coil Voltage】 12V Port size: 1/8″ Female. One side 1/8″ inlet port, other side 1/4″ outlet port.
【Temperature Range】 23-176°F , Pressure Range : 115 PSI
【Feature】This solenoid valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
Description
Size:1/8″ Port | Style:DC 12V
Description : 1/8inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas. This solenoid valve has one 1/8″ inch NPT inlet and one 1/8″ inch NPT outlet port. Valve stays close when the coil is de-energized- and it opens when energized. Has two holes in the bottom and can be mounted in any position. Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized. 2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). WIC Valve is compatible with SMC valves. Specification : Valve Type : 2 Way Normally Closed (Valve opens with energized) Service Media : Air- Gas- Liquid- Water Operation Model : Direct Acting Flow Model : Uni-Directional Flow Rate : 0.23Cv (Fluid Flow)- 22 SCFM at 100 PSI (Air Flow) Response Time : Less than 20 ms Body Material : Anodized Aluminum Seal Material : NBR (Buna N) Armature Tube Material : Brass Plunger & Spring Material : Stainless Steel Coil Certification : CE Certification Coil Power : 6.5W Coil Class : F Class IP 65 (CE Certification) Coil Duty : 100% ED (Continuous Duty) Operating Pressure : Vacuum to 115 PSI Operating Temperature : -5 to 80 °C Port Size : 1/8″ Inch NPT Female Port Coil Voltage : 12V DC Voltage Tolerances : DC : +10% –5% ; AC : +10% -15% Electrical Connection : Grommet Coil with 12″ Lead Wire 2ACK Series Electric Solenoid Valve Package included : 1 x 1/8inch DC 12V Electric Solenoid Air Valve
8. DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed
It will become hot because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60℃. If you want it works long hours, you should find a N/O normally open solenoid valve.
Description
Size:0.02-0.8Mpa
Turn on water when system start;and cut off water when system stop. Food Quality and suitable for Reverse Osmosis water system,etc.
Pay attention
Few buyers use our N/C normally closed solenoid valve to make it work long hours t would become very hot because there are so many coils inside. It’s normal and safe phenomenon. We continually tests and tracks the product’s working status, the highest working temperature of this product reaches 60℃, and the plastic part withstand extremely high temperatures to 150℃. The rated voltage is DC 12V. It’s safe voltage for people. But this operation is unreasonable. In the product reviews, some buyer also mentioned if someone requires the solenoid valve works for a long time, he should buy N/O normally open solenoid valve, so that it will open all the time without power and will not be hot.
9. DIGITEN 12V 3/8" Inlet Feed Water Solenoid Valve Quick Connect for RO Reverse Osmosis
1. Environmental conditions for inlet valve of low pressure solenoid valve Altitude:<
2,500 meters Ambient temperature: 0 to 40 ° C Air relative humidity: <
95% (25 ° C temperature)
2. Type and rated technical parameters Type: guide (one-way) solenoid valve Rated voltage: 12V Rated current: 12v-300mA Working mode: short-time quota system (intermittent duty cycle) Insulation grade: E Use of fluid: (0-55 ° C) water Use water pressure: 0.02-0.8Mpa
100,000 times Package Included: 1 x Electric Solenoid Valve
Description
Size:3/4 Inches
Specification: Brand ：YIDAY Material of body: brass Material of insert: stainless steel (plunger, spring, etc.) Material of seal: NBR (aka Buna-N, Perbunan, and nitrile rubber) Material of diaphragm: NBR with nylon support Flow direction: unidirectional (follow the arrow on valve body) Media: water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (do not use with gasoline) Operation mode: N/C (normally closed) Operation type: 2-way 2-position direct lift diaphragm Pipe size: 3/4″ NPSM Voltage: 12 V DC Water pressure: 0.02-0.8Mpa Operating pressure differential: 3-145 psi (0.02-1 MPa) Operating temperature: 15-125 ℉ (-10~50 ℃) Media Temperature:15-180 ℉ (-10~80 ℃) Feature: Moisture-proof and anti-corrosion. Wear-resistant and high temperature resistance. Durable, practical and stable. Applications: space-limited, energy-efficient, home, hobbyist etc. Package included: 1 x solenoid valve Note: Please allow 1-5mm errors due to manual measurement.
Conclusion
By our suggestions above, we hope that you can found Honeywell Water Solenoid Hb1 for you.Please don’t forget to share your experience by comment in this post. Thank you!
Normally Closed Type. Voltage: DC 12V. Thread Size : 1/2″ G. Working Temperature : 32-176°F ,Working Pressure : 0.02~0.8Mpa
The electric solenoid valve is made of high quality plastic and brass material, with long serving life .
If your central heating or irrigation sprinkler system isn’t working correctly it could be down to the solenoid valve. Repair a faulty valve with this brand new, fast acting 12V DC diaphragm-style replacement.
2. Ximimark 2Pcs 1/2" Thread Plastic Electric Solenoid Valve Water Inlet Flow Switch Magnetic Water Air Normally Closed Tools DC 12V N/C 0.02 to 0.8mpa
The valve body is made of all-plastic material, with 4 points of external thread on both ends of the valve body. The valve body is simple, the power terminal is insert type, and the 6.3 spring is used.
The coil is packaged by the international top-grade coil packaging material, and has the advantages of waterproof, moisture-proof, wear-resistant, corrosion-resistant, high-low temperature resistance.
The insulation grade is high and the heat dissipation effect is good. Under normal conditions, the product can be used for a long time.
This valve is a normally closed solenoid valve, that is, it is energized to turn on (water), and the power is off (water cut).
This is a micro pressure valve (pressure), suitable for 0.02-0.8MPA water pressure, please choose according to your actual needs.
Description
Specifications: Rated power: 5W, no need to divide the positive and negative poles Working mode: quota system (that is, intermittent cycle work system, the longest continuous work for about 4 hours, can continue to work after stopping for ten minutes, there will be danger of burning coils for more than four hours) Use fluid: (0-100 ° C) water Flow characteristics of water: 0.02Mpa>1.5L/min; 0.10Mpa>7L/min; 0.30Mpa>12L/min; 0.80Mpa>20L/min Insulation performance: The insulation resistance between the conductor and the non-conductor is greater than 100MΩ Insulation class: Class E insulation Service life: ≥500,000 times (laboratory data), ≥300,000 times (actual normal use) Valve type: diaphragm (operated by Servo) Usage: water and low viscosity fluids Material: metal + plastic External thread diameter: approx. 20mm Screw hole pitch:25mm Size: approx. 84 x 57mm (L x H) Coil size: approx. 34 x 23mm (W x H) Unit conversion: 1mm=0.039inch
Note: Manual measurement, with small error. Please check size in detail before purchase. Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.
We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
Package Includes: 2Pcs
3. 1/2" Stainless Steel Electric Solenoid Valve 12V DC Normally Closed
This 110V AC brass electric solenoid valve easily replaces broken valves for use with water, air, an
Durable brass construction and a quality copper solenoid are made to last. 1/2″NPT
This valve is N/C (normally closed), meaning it is closed when power isn’t supplied.
The unit operates on 110V AC power and can withstand temperatures of 23F to 176F. This unit fits a 1
We have solenoids available in AC/DC and various size NPT threads as well
Description
Pattern Name:110V AC 1/2″ NPT
This 110V AC brass electric solenoid valve easily replaces broken valves for use with water, air, and other low viscosity fluids. Durable brass construction and a quality copper solenoid are made to last. This valve is N/C (normally closed), meaning it is closed when power isn’t supplied. The unit operates on 110V AC power and can withstand temperatures of 23F to 176F. This unit fits a 1/2″ NPT thread.
We have solenoids available in AC/DC and various size NPT threads as well.
SPECIFICATIONS: 110V AC Working Pressure: 0-100PSI (7Bar) Normally Closed (Opens when powered) Semi-Direct lift valve. Suitable for gravity feed. Temperature Range: 23F to 176F Orifice: 16mm Length: 2-3/8″ Width: 2″ Height: 4″ 1/2″NPT Both Ends
WARNING: Not for use with flammable gas or liquid. This valve is NOT explosion proof.
5. Tailonz Pneumatic 1/4 Inch NPT12V/24V/110V/220V Brass Electric Solenoid Valve 2W025-08 Normally Closed Water, Air, Diesel
Working temperature range: 23-176°F；Pressure range：0-145Psi
This valve’s body is made of solid brass (very corrosion resistant material).
It’s applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.)
6. 3/4" Brass Electric Solenoid Valve 110V AC Normally Closed Water, air, Diesel.
【Service Media】: Air, Gas, Liquid, Water 【Material】Anodized Aluminum
【Valve Type】2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing.
【Port Coil Voltage】 12V Port size: 1/8″ Female. One side 1/8″ inlet port, other side 1/4″ outlet port.
【Temperature Range】 23-176°F , Pressure Range : 115 PSI
【Feature】This solenoid valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
Description
Size:1/8″ Port | Style:DC 12V
Description : 1/8inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas. This solenoid valve has one 1/8″ inch NPT inlet and one 1/8″ inch NPT outlet port. Valve stays close when the coil is de-energized- and it opens when energized. Has two holes in the bottom and can be mounted in any position. Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized. 2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). WIC Valve is compatible with SMC valves. Specification : Valve Type : 2 Way Normally Closed (Valve opens with energized) Service Media : Air- Gas- Liquid- Water Operation Model : Direct Acting Flow Model : Uni-Directional Flow Rate : 0.23Cv (Fluid Flow)- 22 SCFM at 100 PSI (Air Flow) Response Time : Less than 20 ms Body Material : Anodized Aluminum Seal Material : NBR (Buna N) Armature Tube Material : Brass Plunger & Spring Material : Stainless Steel Coil Certification : CE Certification Coil Power : 6.5W Coil Class : F Class IP 65 (CE Certification) Coil Duty : 100% ED (Continuous Duty) Operating Pressure : Vacuum to 115 PSI Operating Temperature : -5 to 80 °C Port Size : 1/8″ Inch NPT Female Port Coil Voltage : 12V DC Voltage Tolerances : DC : +10% –5% ; AC : +10% -15% Electrical Connection : Grommet Coil with 12″ Lead Wire 2ACK Series Electric Solenoid Valve Package included : 1 x 1/8inch DC 12V Electric Solenoid Air Valve
8. DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed
It will become hot because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60℃. If you want it works long hours, you should find a N/O normally open solenoid valve.
Description
Size:0.02-0.8Mpa
Turn on water when system start;and cut off water when system stop. Food Quality and suitable for Reverse Osmosis water system,etc.
Pay attention
Few buyers use our N/C normally closed solenoid valve to make it work long hours t would become very hot because there are so many coils inside. It’s normal and safe phenomenon. We continually tests and tracks the product’s working status, the highest working temperature of this product reaches 60℃, and the plastic part withstand extremely high temperatures to 150℃. The rated voltage is DC 12V. It’s safe voltage for people. But this operation is unreasonable. In the product reviews, some buyer also mentioned if someone requires the solenoid valve works for a long time, he should buy N/O normally open solenoid valve, so that it will open all the time without power and will not be hot.
9. YIDAY DC12V 2-Way Normally Closed Valve Brass Electric Solenoid Valves for Air Water (3/4 Inches)
1. Environmental conditions for inlet valve of low pressure solenoid valve Altitude:<
2,500 meters Ambient temperature: 0 to 40 ° C Air relative humidity: <
95% (25 ° C temperature)
2. Type and rated technical parameters Type: guide (one-way) solenoid valve Rated voltage: 12V Rated current: 12v-300mA Working mode: short-time quota system (intermittent duty cycle) Insulation grade: E Use of fluid: (0-55 ° C) water Use water pressure: 0.02-0.8Mpa
100,000 times Package Included: 1 x Electric Solenoid Valve
Description
Size:3/4 Inches
Specification: Brand ：YIDAY Material of body: brass Material of insert: stainless steel (plunger, spring, etc.) Material of seal: NBR (aka Buna-N, Perbunan, and nitrile rubber) Material of diaphragm: NBR with nylon support Flow direction: unidirectional (follow the arrow on valve body) Media: water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (do not use with gasoline) Operation mode: N/C (normally closed) Operation type: 2-way 2-position direct lift diaphragm Pipe size: 3/4″ NPSM Voltage: 12 V DC Water pressure: 0.02-0.8Mpa Operating pressure differential: 3-145 psi (0.02-1 MPa) Operating temperature: 15-125 ℉ (-10~50 ℃) Media Temperature:15-180 ℉ (-10~80 ℃) Feature: Moisture-proof and anti-corrosion. Wear-resistant and high temperature resistance. Durable, practical and stable. Applications: space-limited, energy-efficient, home, hobbyist etc. Package included: 1 x solenoid valve Note: Please allow 1-5mm errors due to manual measurement.
10. DIGITEN 12V 3/8" Inlet Feed Water Solenoid Valve Quick Connect for RO Reverse Osmosis
Working pressure:0-0.8Mpa. Its working temperature:32-158℉ (0-70℃).
Rated power:4.8W.
Conclusion
By our suggestions above, we hope that you can found Honeywell Water Solenoid Hb1 for you.Please don’t forget to share your experience by comment in this post. Thank you!
