The Best Flotec Well Pump 2 Hp

Product Description

Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25′ or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor – 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.

Amazon.com

This 1/2 HP, built-in shallow well pump jet from Flotec is ideal for wells with pumping levels of 25 feet or less. Featuring a corrosion-resistant nozzle and venturi, this model offers superior performance at capacities to 10 GPM at 40 PSI. It works by self-priming after the pump housing is initially filled with water. The fiberglass-reinforced thermoplastic construction provides incredible corrosion resistance, as well as resistance to sandy water. The dust-proof cover protects all electrical components from dust and insects, thus resulting in a longer-lasting motor. With a stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings, the pump’s powerful motor delivers non-stop operation for years to come.

See all Product description

This Flotec Thermoplastic Shallow Well Jet Pump provides good pressure pumping, perfect for shallow wells less than 25-ft. deep. Thermoplastic construction gives high corrosion resistance. Comes with prewired 30/50 pressure switch. Amps 12.2/6.1, Flow GPH 720, HP 3/4, Max. PSI 78, Max. Suction Lift ft. 25, Max. Total Head ft. 181, Discharge Port in. 1, Self-Priming Yes, after initial prime, Suction Port in. 1 1/4, Thermal Overload Protection Yes, Volts 230/115, Pump Housing Thermoplastic, Dimensions L x W x H in. 22 13/16 x 11 1/16 x 10 1/2. Perfect for shallow wells less than 25-ft. deep Thermoplastic construction gives high corrosion resistance Comes with prewired 30/50 pressure switch Heavy-duty dual-voltage motor Self-priming after pump housing is initially filled

From the Manufacturer

3/4 hp Convertible jet pump. Corrosion resistant constructed of rugged fiberglass-reinforced thermoplastic. Ideal for shallow well applications with pumping levels to 110-Feet

Factory pre-charged to 20 PSI for efficiency – extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design – minimizes gaps between components, reducing corrosion and seam leaks. Convenient size – ideal for small water systems and lower-flow applications. NSF-61 approved. Non-replaceable diaphragm.

Product Description

Flotec, Parts2O, Pentek® Well Pump Control Box, Series: FP217, Heavy Duty, Submersible, 230 V, 60 Hz, 1/2 hp, 3 Wires, NO 4 Maximum Wire, Multiple-Size Electrical Knockouts, 3 in Overall Depth, NEMA 3R Enclosure, Wall Mounting, Standards: UL 778 and CUL Recognized (60 Hz), Fits Pump : 8P4C02S, Induction Run (CSIR) and Capacitor Start / Capacitor Run (CSCR) Applications. For use with 3-wire 4″ submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed.

From the Manufacturer

1/2 hp Control Box that controls the pumps starting and running. This is a three wire model.

Product Description

At air valve, check tank air pressure with tire gauge. If needed, adjust tank pressure up or down

BODY CONSTRUCTION: Heavy Gauge Steel
BODY FINISH: Electrostatically Applied Baked-On Polyester
TANK PRECHARGE: 40 psi Nitrogen-Rich Charge
TANK CAPACITY: 35 gal
EQUIVALENCY RATING: 82 gal
DRAWEOWN WITH 20/40 SWITCH: 12.7 gal
DRAWDOWN WITH 30/50 SWITCH: 10.7 gal
DRAWDOWN WITH 40/60 SWITCH: 9.3 gal
BLADDER / WATER CELL: One Piece Seamless PVC
TANK DIAMETER: 20″
TANK HEIGHT: 36-1/4″
FLANGE: Glass-Filled Polypropylene
PIPE TAP SIZE: 1″ NPT
DISTANCE FLOOR TO TAP CENTER: 2″
MAXIMUM PRESSURE RATING: 100 PSI

From the Manufacturer

Vertical Pre-Charged pressure tank. This tank holds 35-Gallons but is equal to an 82-Gallon standard tank in performance.

Product Description

Flotec, Tempest water removal utility pump, multi-purpose, 1470 gph, 1/6 hp power, 115 vac, 60 hz, 1 in FNPT outlet, 20 ft head, 20 ft suction lift, 8 ft cord length, 77 deg F, thermoplastic, includes: power cord, garden hose Adapter and detailed owner’s manual, standards: CSA certified, UL listed, 930 gph at 10 ft lift, for emergency basement and sump draining, emptying ponds, appliances, wash down, roof dewatering, window wells, basements and rooftops. Submersible utility pump for removing unwanted water down to 3/16" depth. Thermoplastic construction for the highest corrosion-resistance. High-output performance, pumps up to 1470 gph. Removable inlet screen for easy cleaning. Includes 8′ power cord and garden hose Adapter. Csa certified.

From the Manufacturer

The Tempest is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums.