Nowadays, there are so many products of evinrude 5 hp motor in the market and you are wondering to choose a best one.You have searched for evinrude 5 hp motor in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings evinrude 5 hp motor which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
567 reviews analysed
1. Partman Fuel Pump For Johnson Evinrude 18-7350 6hp 8hp 9.9hp 15hp Pre Engine Motor Johnson Evinrude 1993 397839 395091 397274 391638
Description
If your Engine won’t run at full power or will only run with the choke on a faulty fuel pump is likely the cause. This direct replacement fuel pump for your Evinrude of Johnson outboard motor installs quickly and will bring your boat motor back up to full power. Installation is straight forward and a new gasket is included to insure a leak free seal.
Replaces the following part numbers:
Sierra: 18-7350
Mallory: 9-35350
Evinrude or Johnson: 397274, 397839, 391638, 395091
Fits the following outboard engines:
9.9hp 15hp 1993 and older
6 HP 1992 and older
8HP 1992 and older
9.9 HP 1992 and older
15 HP 1992and older
2. Attwood Outboard Motor Hydro-Stabilizer 9401-7
Feature
- For use on outboards under 50 horsepower
- Designed from engineered molded resins, the Hydro-Stabilizer helps to get up on plane, reduces ventilation / cavitation and poor handling
- The Hydro-Stabilizer out-performs ordinary flat hydrofoils by reducing drag when the hull goes on plane.
- Improves getting skiers and wakeboarders up easier and faster
- Improve planing performance and stability
Description
Hydro-stabilizer 9401-7 gives outboards and sterndrives a performance boost, improving both stability and handling. The hydro-stabilizer out-performs ordinary flat hydrofoils by reducing drag when the hull goes on Plane. Wings constructed of engineered Resin. The hydro-stabilizer quickly puts the boat on Plane and helps pull skiers out of the hole faster. Even at lower RPMs, it keeps the boat on Plane. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.
3. CarBole Motor Impeller for Johnson Evinrude BRP OMC 3HP 4HP 5HP 5.5HP 6HP 7.5HP 2-Stroke 277181 434424 9-45216R
Feature
- Number of Blades: 6, Brass Hub
- Depth /Height/width :12.70mm
- Outer /External impeller overall Diameter: 69.34mm
- Internal shaft insert /Hub Diameter : 10.97mm
- This aftermarket impeller replace Johnson / Evinrude / OMC / BRP Outboard Motor water pump impeller 277181 / 434424,18-3001 .OEM PART NUMBERS USED FOR REFERENCE PURPOSES ONLY.
Description
This aftermarket impeller replace Johnson / Evinrude / OMC / BRP Outboard Motor water pump impeller 277181 / 434424,Sierra 18-3001 .
Impeller Dimentions:
No. Blades: 6
Depth /Height/width :12.72mm
Outer /External impeller overall Diameter: 69.3mm
Internal shaft insert /Hub Diameter : 10.97mm
Net Weight: 41g
Applications(Evinrude Johnson 2-stroke outboard motors ):
3HP 1952-1978
4HP 1969-1972
4HP 1973-1983 (For water pumps using 1 water tube ,110 gearcase)
5HP 1965-1968
5.5HP 1954-1964
6HP 1952-1978
7.5HP 1954-1958
Package included:
1pc impeller .
4. SouthMarine Boat Engine Impeller 18-3003 377178 775519 for Johnson Evinrude OMC BRP 9.5HP 10HP Outboard Motor
5. Full Outboard Motor Cover, Boat Engine Cover, Waterproof, Heavy Duty, Black
Feature
- Made of 210D marine grade polyester canvas with silver coating.
- Designed for protecting your motors from rain,water,dust,UV rays damage.
- Drawstring & zipper provides secure snug fit. Reinforced Top-stitched seams.
- Covers the whole motor from top to prop with the measurement of: CIRCUMFERENCE: from 47 Inches to 85 Inches, Height from 37 Inches to 72 Inches.
- Note: This cover is only for storage use when motor is not running. Please check measurements and according to the size chart (last picture) before purchase.
Description
Boat Outboard Motor Cover Size Chart:
40 – 50HP: C1- 65″ / C2 – 70″ / H – 56″
60 – 90HP: C1- 71″ / C2 – 76″ / H – 64″
100 – 150HP: C1- 81″ / C2 – 85″ / H – 70″
Please check measurements and according to the size chart (last picture) before purchase.
Color:
Black
6. PrimeShield Outboard Motor Cover, Waterproof Boat Motor Covers, 600D Heavy Duty Motor Hood Cover, Outboard Engine Cover Fits Motor Up to 10Hp/20Hp/60Hp/150Hp
Feature
- SIZE & FIT: 21″(D) x 12″(W) x 16″(H). Heavy Duty waterproof outboard motor cover protects boat motors up to 10 HP. Fits most brands like Mercury, Yamaha, Honda, Suzuki, Nissan.
- WATERPROOF PERFORMANCE: The boat motor cover is made of 600D polyester fabric with a waterproof PU coating and an anti-UV coating, which protects your boat engine against damage from sun, wind, dust, and other natural elements…always keeping it in good condition. This 600D engine cover is also cold-resistant down to -68 Fahrenheit to protect your boat motor in the winter months too.
- UV PROTECTED: This boat motor cover has double line stitching and high-density bound seams for great durability. It comes with anti-ultraviolet sun and heat protection, easy to withstand sunlight, and keeps the cover new and clean.
- SECURE QUICK RELEASE SYSTEM: The elastic cord around the bottom hem ensures a tight fit to provide your motor with 360 degrees of all-around protection. No more worry about your motor cover will blow away in a strong wind!
- All PrimeShield products carry a One-Year warranty, please be assured. If you have any problem or question, simply contact our customer service team. In order to choose the right size cover, please determine the size of your outboard motor first.
Description
PrimeShield : Using prime covers to shield your accessories.
PrimeShield 600D Heavy Duty Outboard Motor Covers
If you are looking for a protective cover for your outboard motor, this one would be a nice choice. Made of 600 denier polyester fabric with PU coating, this waterproof cover is all-weather protective and protects your motor from natural elements like uv ray, dust, hail and so on. Worried about low temperature? This motor cover is cold-resistant down to -68 Fahrenheit.
Exquisite workmanship: we produced every cover with heart
Every motor cover has double-stitched interlock seams, for better firmness. High density stitching ensures extra durability, will not rip, shrink or stretch, designed for long-term storage and mooring
Warranty Information
We offer One-Year Warranty for all PrimeShield products, please be assured place orders. We try our best to offer nice products and service.
Size specification for your reference
M: fits motor up to 10HP, 21″D x 12″W x 16″H
L: fits motor up to 20HP, 24″D x 13″W x 18″H
XL: fits motor up to 60HP, 28″D x 15″W x 25″H
XXL: fits motor up to 150HP, 29″D x 17″W x 29″H
7. SouthMarine Boat Engine 0114812 114812 Water Pump Impeller for Evinrude Johnson OMC Outboard Motor 2HP 2.5HP 3HP 3.3HP
Feature
- Number of Blades: 6, Height: 14.34mm / 0.56in
- Can’t just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can’t confirm that, please consult us.
- External Impeller Overall Diameter: 42.94mm / 1.69in
- Internal Shaft insert Diameter: 11.85mm / 0.47in(not including double key depth)
- Internal Shaft Insert Diameter: 15.13mm / 0.60in (double key internal diameter)
8. Wingogo Water Pump Impeller for 9.5HP 10HP Johnson Evinrude OMC Outboard 0775519 0377178 0777833 Sierra 18-3003
Feature
- This Water Pump Impeller fits Johnson Evinrude OMC Outboard Motor OEM P/N 0775519 0377178 0777833 Sierra 18-3003. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure.
- Replacement for Johnson Evinrude OMC Outboard 9/9.5/10 HP Boat Motors Engine Cooling System. More Detailed Information Please See Description Below.
- Water Pump Impeller Dimensions : Internal / Insert / Hub / Shaft Size: 0.551 inch , Depth / Height / Width/Thickness: 0.500 inch, Overall / Outer / External Diameter: 2.750 inch. Blades 6 Neoprene Water Pump Impeller as Pictures Showed, Please see the pictures.
- Compatible with the outboards boat motor Sierra Marine 18-3003 Mallory Marine 9-45218 9-45218-10 GLM 89670 SEI Marine 96-361-03BE CEF 500349. This Impeller Makes Repair and Maintenance of Water Pumps Easy.
- To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANCE to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirm this Water Pump Impeller fits Your Outboard Boat Motor or not. We’re pleasure to help you.
Description
Water Pump Impeller 377178/775519 for Johnson Evinrude OMC BRP 9HP-9.5HP-10HP Outboard Motor.
This impeller replaces Sierra part number 18-3002.
Specification:
Material: Neoprene and Metal
Number of Blades: 6
Impeller Height: 13.30 mm
Overall Diameter: 69.60 mm
Shaft Diameter: 14.10 mm
Net Weight : 40 g
Quantity: 1 Piece
Applications:
This impeller is for Evinrude and Johnson OMC 9.5/10 HP Outboard engine.
9.5 HP 1964-1973
10 HP 1958-1963
Package Included:
1pc x Water Pump Impeller
9. Fuel Pump Rpelacement with Gasket for Johnson Evinrude Outboard Motor Pre 1993 6hp 9.9 hp 15 hp Models with Replace OE # 18-7350 395091 397274 391638 397839 97839
Feature
- Replace OE Part #: This Apeixoto fuel pump is manufactured with the OE standard and can be replaced directly. The replace OE part numbers are 397839, 391638, 395091, 9-35350, 18-7350, 397274.
- Compatiblity: This fuel pump is compatible with Johnson Evinrude Marine 6hp 8hp 9.9hp 15hp Engine Seahorse Outboard 1981-1992, Evinrude 1969 1975 25hp, 1965 Johnson 9.5hp, older 70’s 25hp. You can also check a detailed fitment information below.
- Package: The package comes with a 18-7350 fuel pump and a gasket.
- Easy Installation: This fuel pump is a direct replacement and can be installed directly. It matches the original equipment well.
- Warranty: We offer 30 days free return and 365 days free replacement warranty for this fuel pump. If you need any assists during usage, we are here to help
Description
OE Replace #: 397839, 391638, 395091, 9-35350, 18-7350, 397274.
Fitments:
Johnson Evinrude Marine 6hp 8hp 9.9hp 15hp Engine Seahorse Outboard 1981-1992
Evinrude 1969 1975 25hp, 1965 Johnson 9.5hp, older 70’s 25hp
Conclusion
By our suggestions above, we hope that you can found Evinrude 5 Hp Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!
