562 reviews analysed
1. Kreg KMA2685 Circular Saw Guide
Feature
- Make rip cuts and crosscuts up to 24″ wide
- Cut multiple pieces to the same size with just one setup
- Use the oversize edge guide for precise control throughout the cut
- Eliminate need for marking, measuring, and layout lines
- Take your saw to the material instead of having to take your material to the saw
Description
TURN AN ORDINARY CIRCULAR SAW INTO A PRECISION EDGE-GUIDED CUTTING TOOL
Great projects start with high-quality cuts, and you can make those cuts—more easily than you ever imagined—using your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want—up to 24″—using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the universal sled—it accepts most left-blade or right-blade saws—and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24″) using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.
2. Metabo HPT C10FCGS 10" Compound Miter Saw, 15-Amp Motor, Single Bevel, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10" 24T TCT Saw Blade
Feature
- Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
- 15-Amp motor delivers high power for the toughest of cuts
- Miter angle range: 0°-52°, to the right and left for increased flexibility
- Bevel range: 0°-45˚, to the left with adjustable bevel stops for precision cuts
- Large table for better material support with vice clamping system to secure work piece
3. DEWALT DCS391B 20-Volt MAX Li-Ion Circular Saw(Tool Only)
Feature
- Powerful 460 MWO, 5,150 RPM motor delivers power and speed to make the most demanding cuts with ease
- High strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy
- 0-50°(degree) bevel capacity allows for aggressive bevel cuts for a multitude of applications
- Optimized rubber overmolded comfort grip delivers optimal balance and control
- Power Tool Type: Cordless
- 6.5-Inch carbide-tipped blade for cutting 2 times material at 90° and 45° and more cuts per charge
- Includes: DCS391 6.5-Inch Circular Saw and 6-.5-Inch Carbide-tipped Blade
- Battery & Charger Sold Separately
Description
The DEWALT DCS391B 20V MAX 6-1/2″ Circular Saw features a powerful 460 MWO, 5250 RPM motor that delivers power and speed to make the most demanding cuts with ease. A high strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy, and an optimized rubber overmolded comfort grip delivers optimal balance and control. The 0Degree-50Degree bevel capacity allows for aggressive bevel cuts for a multitude of applications, along with the 6-1/2″ carbide tipped blade for cutting 2x material at 90Degree and 45Degree and more cuts per charge. No load speed: 5250 rpm, Arbor size: 5/8″, Depth of cut at 45Degree: 1-5/8″, Depth of cut at 90Degree: 2-1/4″. Includes: DCS391 6-1/2″ Circular Saw, 6-1/2″ Carbide-tipped Blade. This is a bare tool item (battery sold separately).
4. Bosch Deluxe Router Edge Guide With Dust Extraction Hood & Vacuum Hose Adapter RA1054
Feature
- ADJUSTABLE: Features precision fine adjustment control. works with following products: MRF01, VAC006, MRF23EVS, VAC021, 1618EVS, 1617, 1617EVSTB, 1617EVSPK, MRP23EVS, 1619EVS
- VERSATILE: The Bosch RA1054 Router Guide adds to the versatility of Bosch routers as the guides cut along the workpiece or up to 8 inches in from edge. You’ll also have the freedom to do edge-forming using non-piloted bits
- CONVERTABLE: The router guide quickly and easily converts into circle guide for making arcs and circles up to 32 in. in diameter
- ALL IN ONE: Includes router guide, pivot plate, dust extraction hood, vacuum hose adaptor, attachment hardware
- GUARANTEED You can feel secure with your purchase with Bosch’s 1-year limited warranty
Description
Product Description
The Bosch RA1054 Deluxe Router Guide greatly expands the versatility of Bosch routers. It makes it possible to do edge-forming using non-piloted bits, and guides cuts along the workpiece edge or up to 8 inches from the edge. Standard equipment includes dust extraction hood and vacuum hose adapter that allows connection to 1-1/4-inch, 1-1/2-inch and 35mm hoses.
From the Manufacturer
The Bosch RA1054 Deluxe Router Guide greatly expands the versatility of Bosch routers. It makes it possible to do edge-forming using non-piloted bits, and guides cuts along the workpiece edge or up to 8 inches from the edge. Standard equipment includes dust extraction hood and vacuum hose adapter that allows connection to 1-1/4-inch, 1-1/2-inch and 35mm hoses. The RA1054 also includes a pivot plate and can be easily converted into a circle guide for making circles and arcs up to 32 inches in diameter.
5. DEWALT 15 Amp 10-in Compound Miter Sa
Description
The DWS713 10 in. Compound Miter Saw has a 15 Amp motor to drive 5,000 RPM, delivering extended power and durability. Features stainless steel miter detent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 4-1/2 in. of crown molding vertically nested. Lightweight design and built-in carry handle for portability. 2 in. x 6 in. dimensional lumber cross cut capacity at 90 degrees and 2 in. x 4 in. dimensional lumber at 45 degrees Includes: 15 Amp 10 in. Single Bevel Compound Miter Saw – DWS713,10 in. Carbide Tipped Blade,Wrench,Dust Bag,Vertical Clamp.
6. Bora 50" WTX Clamp Edge, Saw Guide Straight Edge, 542050
Feature
- Made of heavy-gauge, extruded aluminum for extreme durability
- Adjustable clamp end slides easily up and down saw guide to fit material to be cut
- Locking handle grabs work surfaces for a secure edge that won’t Budge
- Fits with the Bora router guide, saw guide, and jig saw guide
- Easy to increase length with extension accessories
Description
The Bora WTX clamp edge saw guide is the perfect addition to your Circular saw, router or jig saw. Now you to make straight cuts with ease. Made out of heavy gauge, extruded aluminum, The WTX clamp edge is tough and durable. The adjustable end clamp slides easily along the precise channels, eliminating the need for the internal channel bar, reducing weight and wear. The locking handle tightly grabs work surfaces, giving you a secure edge that won’t Budge. This allows you to make precise track-saw like cuts with a circular saw, jig saw or router. The WTX clamp edge has a cutting capacity of 50 inches and an additional 50 inches can be added by purchasing the WTX 50″ Clamp edge extension. The handle is molded with a hanging notch for convenient storage.
7. Bora Saw Plate – The Easy To Use Saw Sled/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications & Measurements | 544006
Feature
- Works with the Bora WTX Clamp edges and Bora NGX clamp edges
- Versatile – Fits right- and left-handed circular saws
- Improved Front fence minimizes side to side tool movement
- New side stop allows you to replace the tool in exactly the same place, every time
- Low profile front Clamps allow a greater range of placement
- Friction fit cut indicator doesn’t require tools to adjust or lock in place
- Secure – 3 points of contact means your saw is held securely while cutting
- Replaces Bora saw plate – 542006
Description
Precise cuts in sheet materials or solid wood requires the right setup. The improved Bora saw plate delivers that with innovative new features that increase precision, accuracy and repeatability. With 3 solid connection points to your saw, it holds tight to give you confidence and precision with every cut, allowing for pro level results.
8. Bora 542007 Rip Guide for Bora Saw Plate 542006. The Circular Saw Guide Rail that Produces Straight Cuts up to 24”
Description
No more drifting while you cut — this two-part tool Allows you to use two hands to keep your Circular saw Straight and true when ripping your sheet material. Simply attach the extruded aluminum rail to your saw plate and rip handle, and then Walk the rip guide along the edge of your plywood. This is a must-have tool for anyone who needs straight cuts in boards and sheets.
9. POWERTEC BS900 Band Saw, 9-Inch
Feature
- Patented blade guard adjustment for quick and easy blade change
- Table with rack and pinion adjustment for easy tilt to 45 degrees
- Blade tracking window
- Quick release blade tension lever makes blade changing easy (patented)
- Blade width range 1/8-Inch to 3/8-Inch increased versatility for scroll cutting and resawing
Description
Product description
Induction Motor. 1/2 HP, 2.5 Amps, 1725 RPM, Blade Size: 62″ x 1/8″ x 3/8″, Aluminum Die Casting Table Size: 11-3/4″ x 11-3/4″, Dust Port: 2″, Throat Depth: 9″, Max. Depth of Cut at 90 degrees: 3-5/8″, Max. Depth of Cut at 45 degrees: 2″. 50 lbs
From the Manufacturer
Induction Motor. 1/2 HP, 2.5 Amps, 1725 RPM, Blade Size: 62-Inch x 1/8-Inch x 3/8-Inch, Aluminum Die Casting Table Size: 11-3/4-Inch x 11-3/4-Inch, Dust Port: 2-Inch, Throat Depth: 9-Inch, Max. Depth of Cut at 90 degrees: 3-5/8-Inch, Max. Depth of Cut at 45 degrees: 2-Inch. 50 lbs
10. Evolution Power Tools ST1400 Track/Guide Rail For Circular Saws (Clamps and Carry Bag Included), 1400 mm
Description
Compatible with most brands The Evolution ST1400 is a 55-inch Circular saw track. Ideal for cutting 4 ft. Sheet materials and is made from a strong and sturdy T5 aluminum alloy.
Conclusion
By our suggestions above, we hope that you can found Black And Decker Table Saw Crosscut Guide for you.Please don’t forget to share your experience by comment in this post. Thank you!