The Best Dash Disc Mount

Worried that your suction cup mount will damage your dashboard?
Mounting your GPS, cell phones and other devices on the car dashboard or windshield is essential while driving. It allows you to conveniently view your messages without taking your eyes off the road.

However, the mounting pedestals and suction holders of these electronics can be sticky. When placed on textured or soft dashboards, they can damage the surface. Plus, they leave a residue once you decide to remove them.

Protect your dash from adhesive remnants with Crossery Adhesive Mounting Disk!

This car accessory fits any 60mm suction mount for smartphones, car cameras and GPS. The disk adheres to the dashboard, while the suction cup holds on to the disk. With a much larger size than the cup, it ensures a secure attachment so that the pedestal won’t fall off.

The strong adhesive ensures that your device won’t drop even if it is placed on your windshield. It will not melt or lose its strength under the heat of the sun.

Don’t worry about upgrading your devices in the future, when you would need a larger disk. We used a semi-permanent adhesive that can be detached as easily as it is set up.

Here are more benefits of using our mounting disk:

? Also comes in larger sizes of 80mm and 90mm to suit your needs
? The disk is compact and won’t take up too much space on your dashboard
? A practical gift for friends and family on any occasion
? Backed with a 2-year warranty
Mount your devices on the dashboard safe and secure. Add Crossery Adhesive Mounting Disk to your cart TODAY!

The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.

WizGear Universal Stick On Magnetic Car Mount Holder Black, 2 Pack

Setting up your phone on a mount in your car has never been easier! WizGear Air Vent Car Mount for Smartphones saves you the hassle of placing your smartphone securely to make sure it doesn’t fall, just stick it on your car dashboard! The WizGear Air Vent Mount features a magnetic technology, which means your smartphone will be secure and have no chance of falling. When a phone is secure in place, it becomes easier to use for GPS navigation too.

Features
1) This magnetic car mount for cell phones is not bulky or space consuming at all. You no longer have to suffice for keeping your phone in the cup holder or dashboard, because a normal car mount gets in the way. This magnetic car mount sticks on a dashboard, thereby not blocking your windshield or Air Vent.

2) Navigation is extremely easy with this magnetic car mount. It can easily rotate, fix, or tilt to any angle that best assists the viewer of the phone.

3)The magnetic technology is safe to use, and will not harm any smartphone. The carbon steel plates inside the magnetic car mount are ultra thin and designed in a way that it provides powerful holding power as well as absorbing magnetic instability. Along with being safe, it is also powerful, it attracts any phone to it quickly – this is the swift snap feature. The user can just bring the phone near the mount and it will take it easy, so the user no longer has to fuss about safe keeping their phone

Instructions how to set up the Mount
1)First clean up the surface on the mounting place.
2)Peel off the sticker from the mount and stick it on.
3)Place the magnet metal plate in your case between the cover and the phone, Or stick on the round magnet metal on your phone or GPS
3) And your phone is good to go!

The Steelie Orbiter Dash Mount Kit keeps your phone conveniently accessible on the dash while letting you easily adjust your screen for the perfect viewing angle. This kit combines a Dash Mount with the powerful Orbiter Magnetic Socket and a low-profile metal plate that easily attaches to your phone or case. Our Dash Mount adheres on any vehicle dash with strong, removable 3M® VHB® adhesive for a secure hold. The Orbiter Magnetic Socket attaches to the Dash Mount using a powerful neodymium magnet and silicone center for a secure connection and smooth glide. By combining magnetic power and a thin high-friction ring designed to prevent slipping, the phone docking surface of the Orbiter Magnetic Socket holds your phone securely in place. Once the Dash Mount and Orbiter Magnetic Socket are affixed to your vehicle dash, simply adhere the low-profile metal plate to your phone or case and you’re ready to quickly attach, detach, and rotate your phone for the perfect viewing angle.

Steelie neodymium magnets are safe for use with mobile devices, but should be kept away from magnetically sensitive objects like credit cards, pacemakers or computer hard drives.

Nite Ize has been creating innovative, solution-based products with quality, performance and value at the core for over 25 years. Based in Boulder, Colorado, we aim to continue offering imaginative and innovative products that make our customers’ lives easier, safer and more fun.

Universal Compatibility
About 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.

Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.

Removal Instructions
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.

Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can’t be reapplied.

Package
2 * 70mm Adhesive Mounting Disk

Broad Compatibility
Compatible with all 17.2mm swivel ball mounting bracket.NOTE: Mounting bracket not included.
Perfect replacement for broken or ineffective parts of your original

Strong Sticky＆Reusable Suction Cup Mount
Quality suction cup along with sticky gel pad layer make sure the mount attach well to the dash or windshield and stay put even through the bumpy road.
Suction cup can be restored in mint condition by simply rinsing under warm water and air dry.

NOTE:
1.Compatible with 17.2mm Mounting Bracket (not included). If the swivel ball is not fit your bracket, please contact with us, we will provide you with full refund.
2.If the surface of your car s dashboard is not completely smooth, but textured, please use the 3M dashboard pad.The suction cup may not compatible with leather or vinyl dashboard. Recommend that to mount it on the windshield for stronger hold if your car’s dashboard surface is leather or vinyl.
3.Please avoid to expose it to the sun in high temperature for a long time in case reduce the using life of the suction cup.
If there is residue here, you can wipe it off with alcohol.

Package Contents:
1 x Suction Cup
1 x Sticky Gel Pad
1 x User Manual

Warranty
Our goal is to provide an exemplary level of customer service.
We provides LIFETIME warranty for a refund or replacement if any quality issue.
Feel free to contact us

Simple Usage Modes

Just push the Mpow mount holder into the CD slot, it will get stuck firmly. Then place the metal plate between your device and it can hold your smartphone safely.

360 Degree Swivel

Innovative ballhead construction allows you to quickly adjust to optimal angle in 360 degrees. No Blind Side.

Three-sided Clip

Three-sided cradle keeps your sensitive electronic devices firmly in place while still allowing full function. Two cushioned side grips keep your electronic device safe and secure, while a detachable ledge creates a resting shelf for additional support. Remove your device easily and quickly with a push-button release.

Wide Compatibility

Up to 3.9in locking range allows large phones with thick otter box. Phone models included: iPhone X/8Plus/8/7Plus/7/6Plus/6s/6/5s, Samsung Galaxy S9 Plus/S9/Note 8/S8 Plus/S8/S7 Edge/S6 Edge/Note7/Note5, Google Nexus 6/Nexus 5/Nexus 4, LG V30 Plus/V30, Microsoft Lumia 950 XL Dual Slim …

Note：Unfitted Car Model

According to customer’ review, the car phone holder may not suitable for these models：

1.LEXUS F-350 2006、Lexus ES300 2016、Lexus is 250 2008、Lexus RX 350、Lexus NX200t 2015、LexusGS350；

2.Ford Focus 2014、F-150 2015、F-150 2017、Ford Fusion、Ford Escape 2015、Ford C-Max 2015、Ford Focus SEL 2012、Ford Flex 2010；

3.Nissan 2001、Nissan 2011、Nissan Tundra、Maxda CX-5 2017、Hyundai Tucson 2017、Sonata Hybrid 2013、2006 Toyota Tacoma、Astra 2012 ；

4.Cadillac SRX、Cadillac CTS 2010、Honda Accord、2015 Chevy Tahoe、2011 Chevy Equinox 、Dodge grand caravan 07、Chevy S10、GMC Sonoma、Gorvette 2002

Warranty

Every Mpow Product includes a 45 days money back & 18-month worry-free!

The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.