The Best Hose For Kenmore Central Vacuum System

The 93048 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93048 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.

The 1.25″ (32mm) 99867 crush proof vacuum hose is ideal for commercial and domestic vacuum applications including dry, wet-dry, central vacuums, extraction equipment and as a general use vacuum hose demanding excellent flexibility and a smooth interior for superior air flow. The 99867 hose accepts standard threaded vinyl cuffs and bent ends making it immediately compatible with commercial vacuum equipment, central vacuum inlets, and both metal and plastic standard vacuum wands. This hose is silver in color.

The #99702 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also included is an installed knit hose sock, which saves your furniture and furnishings from the wear and tear of the hose.

Crushproof, Lightweight, 360-degree Swivel, 30-foot Central Vacuum Hose With On/off Switch For The Suction. A Great Central Vacuum Cleaner Replacement Hose For Everyone Who Uses An Air Driven Non-electric Power Brush Such As All Models Of Turbocat And Other Small Air-driven Brushes. Compatible With Vacuum Wall Valves With Two Small Low Voltage Metal Contacts Inside The 1.5 Inch (or So) Diameter Hole. Use With Chrome Extension Tube Wands. Attn Vacuflo: The Hose End Doesn’t Have Two Metal Valve Pins

Compatible with:

• Imperium
• Eureka
• Electrolux
• Beam
• Broan
• Nutone
• Canavac
• Rhino-Vac
• Vacumaid
• Royal
• Hayden
• Riccar
• Kenmore
• & More!

Cen-Tec’s 93642 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. The 1.375” x 35 foot hose is longer than the industry standard 30 feet to insure you reach everywhere in your home. A hose with an inner diameter of 1.375” insures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 93642 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.

This premium 12 inch wide natural bristle bare surface floor brush is ideal for vacuuming all types of bare surface floors, including marble, hardwood, tile, linoleum, laminate, parquet, and can even clean low pile rugs. The bristles are made from natural horse hair which provides a very soft brush which will not scratch even high gloss floors such as marble. The 90 degree swivel neck makes maneuvering around furniture, or underneath tables incredibly easy. The diameter of the swivel neck measures 1.25″, which will fit nearly every central vacuum system on the market, including; NuTone, Beam, VacuFlo, Hayden, CenTec, Electrolux, Dirt Devil, Hoover, MD Manufacturing, and many others. It also works with many stand alone vacuum cleaners such as Dyson, Hoover, Bissell, Eureka, and all other brands which use a 1.25″ diameter hose or wand. Risk free money back guarantee on size, fit and quality.

The 94060 full feature central vacuum cleaning accessory package is designed to deliver all the premium features sought in an electric accessory package. The CT16QD power nozzle delivers on the three most sought benefits associated with an electric power nozzle: deep cleaning helping preserve carpet life, brushed edge cleaning, and excellent surface grooming of the carpet surface helping to maintain carpet appearance. The poly-v Quiet Drive system reduces noise and vibration from the power nozzle. A window over the agitator allows easy confirmation the nozzle is running. . The 30 foot crush proof total control electric hose with pigtail connection is designed for universal use and features a 360 degree swivel handle and a three position switch allowing independent control of the power nozzle and the central vacuum. A full complement of accessories addresses the need for a hard floor brush solution and extends the benefits to all above the floor cleaning needs. The 94060 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Hayden, Vacumaid, Vacuflo, Cyclovac, Honeywell, Husky, Nutone, Canavac, MD, Imperium, and Galaxie as well as other regional brands.