Top 10 Zodiac Above Ground Pool Vacuum

From the Manufacturer

The Zodiac Ranger Suction Side Automatic Above-Ground Pool Cleaner effectively cleans above-ground swimming pools including dished-out bottoms up to 72 inches! It features one moving part technology, which eliminates annoying hammer or flapper noise commonly associated with other pool cleaners. The unique Deflector Wheel helps prevent it from getting caught on steps, ladders and corners! The Ranger comes pre-assembled for easy installation and includes 32 feet of feed hose.
Intelligent Design
The cleaner body comes pre-assembled and will install in just minutes, best of all it requires no tools! Its extra-large Wheel Deflector helps the Ranger navigate your pool and avoid getting caught on steps, ladders or in corners so it can clean your pool uninterrupted. AG Disc – Allows the Ranger to glide effortlessly along the bottom of your pool, up the sides and around steps, cleaning your whole pool. The only single moving part is the diaphragm, which eliminates the need for gears, wheels, and flappers – which means simple operation and easy maintenance.
Maximum Efficiency
Additionally, the Flowkeeper Valve and Insta-Skim Compact self-adjusting flow control valve automatically regulates water flow, ensuring peak performance. The Ranger is built to work quickly, effectively, and quietly, automatically regulate water flow, ensuring peak performance.

Package Includes:
1 x Swimming Pool Cleaner
10 x Durable Hoses Sets
1 x Regulator Valve
1 x Manual
Problem: Cleaner is sluggish or has stopped operating.
Solution:
● Check if the pump is ON and / or primed.
● Check Cleaner head for blockages.
● Clean and empty pump basket and empty skimmer/weir basket.
● Ensure the filtration system is thoroughly cleaned. Clean sand/cartridge filters on your pool
pump as per manufacturers specifications.
● Inspect the regulator valve and flush away any debris build-up.
● Check the Mat for wear.
● Make sure the curved tips of the Mat are facing upwards.
● Ensure that the skimmer/weir vacuum lid is fitted correctly and check for cracks.
● Check the hose for blockage.
● Check the hose for leaks by lifting each section above water while pump is running.
● Consult a pool shop in your area.
Problem: Cleaner travels in a repetitive pattern.
Solution:
● Adjust return jets downwards.
● Verify proper hose length.
● Ensure cleaner sits flush with the pool floor. Adjust the position of hose weight if necessary.
● This should be done at the deepest part of the pool.
● Remove or add one hose section.
● Inspect the Regulator Valve and flush away any debris build-up.
● Check that the hose sections are straight; if not, lay hose in a straight line in the sun to relax
the memory.
● Twist each hose section a half-turn at each connection point.
● Ensure the wheel at the top of the Cleaner head is rotating freely.

Instructions: Cleaner will not go into a shallow end that is less then 3ft deep.The hoses may not connect too tight so that the pool cleaner can move freely and reach more spots. Minor air leaking from the connection is normal. The cleaner won’t pick up leaves and articles.

The Zodiac MX6 is a compact yet powerful, ultra-efficient, suction side pool cleaner that features best in class vacuum power and programmed navigation for a totally clean pool without all the hassle. With an innovative low-flow design, it consumes less energy than any cleaner in its class, making it ideal for pools with 2-speed and variable speed pumps. The MX6 also incorporates cyclonic suction for powerful vacuuming and an articulating turbine blade for aggressive wall-climbing. Swiveling hoses are quick-connect style for easy assembly and a flow regulator controls the water flow so there is nothing to adjust at the skimmer. Includes 8.4m of hose and is backed by a 1 year warranty.

Product description

The Baracuda G3 will thoroughly clean your inground pool floor and walls to automatically remove dirt, debris, bugs, twigs, leaves, sand and even pebbles. The G3 has only one operational moving part-the Long-Life Diaphragm. No gears, wheels, or flappers means simple operation, maximum power, and low-cost maintenance. It’s compact and self-adjusting flow control valve automatically regulates water flow, ensuring peak performance even with lower horsepower pumps. Plus, Flowkeeper offers pool surface skimming with a turn of a switch.

From the Manufacturer

The Zodiac G3 In-Ground Suction Pool Cleaner is a quiet and powerful suction cleaner that works with low-speed pumps to clean with maximum efficiency. The G3 will devour small and medium-sized debris without trouble to ensure the floor, walls and steps of your entire pool receive a thorough cleaning.
Premium Efficiency
The Zodiac G3 is compatible with any single, two-speed or variable-speed pumps to clean more efficiently and with less flow. G3 suction cleaners work with a FlowKeeper Valve that automatically regulates water flow, to maintain peak cleaning performance even with lower horsepower pumps. Plus, Flowkeeper offers pool surface skimming with a turn of a switch Intelligent Design
Navigating an in-ground pool is made easier by the Wheel Deflector which helps with movement around tight corners. Equipped with scuff-resistant Long-Life Hoses, the G3 is a rugged pool cleaner that is eliminates scuffs on all pool surfaces. The 36-Fin Disc is cleverly designed to increase adhesion to the pool surface and avoid getting hung-up on lights, drains covers, fittings and other pool features.
The G3 has a durable Long-Life Diaphragm with reliable, one-moving-part-technology that eliminates the need for wheels, flappers or gears to provide silent operation and low-cost maintenance. The patented Quick-Release Cassette provides easy access to the diaphragm for simplified routine maintenance.
Convenient Installation
The G3 suction cleaner works in all in-ground pools and can be installed in two simple steps:
1. Attach the disc, wheel deflector and hose
2. Connect to the skimmer or dedicated suction line
* No tools or special plumbing required *

Dependable Service and Efficient Cleaning

• A reliable vacuum with a long service life. Minimal maintenance is required, as the superior long life diaphragm membrane is the only moving part, and it can easily be reached for routine maintenance or to clean out any oversized debris. There’s no need for costly replacement or repair of flappers, gears and wheels that other types of vacuums may require.
• Removes debris quickly and easily, even with a low-speed or lower powered pump, as it only requires a 1/3 HP pump or a minimum flow of 8 meters cubed/hour to operate.
• Durable and efficient pool vacuum cleaning system that thoroughly cleans your entire pool, as it quickly removes debris as it moves across floors, climbs up walls and over steps without getting stuck. Vacuum moves in a random pattern and has a deflector wheel that helps it move around tight corners and also prevents it from getting caught on steps, corners and ladders.
• Includes a one year warranty

Easy installation

• No tools are required, as it simply attaches to your existing filtration system, so you can install it quickly and easily.
• Includes 35 feet of premium spiral wound vacuum hose (14 – 2.5 feet hose sections). The hose sections allow you to customize the hose length to the requirements of your pool.
• Contains a flow regulator valve to adjust the vacuums working speed, a suction test gauge, a universal hose adapter and hose weights

U.S. Pool Supply is your online source for professional high quality and affordable pool cleaning and maintenance supplies, pool accessories and for pool recreational activity pool toys, floats and leisure lounges. We offer all the essential items needed to help residential pool owners care for and maintain their own pools, so they can eliminate the need for expensive scheduled pool service technicians.