![](https://images-na.ssl-images-amazon.com/images/I/51hg096SM9L._AC_SL700_.jpg)
Nowadays, there are so many products of infrared long range arduino in the market and you are wondering to choose a best one.You have searched for infrared long range arduino in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings infrared long range arduino which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
772 reviews analysed
1. Gowoops Infrared Photoelectric Sensor E18-D80NK Obstacle Avoidance for Arduino Robot Car
Feature
- E18-D80NK is a set of transmitter and receiver in one of the photoelectric sensor
- Detection distance can be adjusted according to requirements
- Long distance detection, low visible light interference, cheap price, easy assembly, and easy to use
- Can be widely used in robot obstacle avoidance, pipeline line piece and many other automation products
Description
Pin Definitions:
Brown —- “+”
Blue —- “-“
Black —- Signal
Applications:
1. Automatic production line of goods counting equipment
2. Multi-function reminder
3. Take the maze robot
Electrical Characteristics:
Sensing range: 3-80cm
Sensing object: Translucency, opaque
Supply voltage: DC5V
Output operation: Normally open (O)
Output: DC three-wire system (NPN)
Technical Parameters:
1. Output Current DC / SCR / Relay Output: 100mA / 5V power supply
2. Current consumption DC <25mA
3. Response time <2ms
4. Pointing angle: ≤ 15 °, the effective distance 3-80 CM adjustable
5. Detection of objects: transparent or opaque body
6. Working temperature: -25°C ~ +55 °C
7. Standard detection object: the following incandescent 3000LX below 10000LX sunlight
8. Housing material: plastic
Size:
Diameter: 18MM
Sensor length: 45MM
Lead Length: 45CM
Package Include:
1 x E18-D80NK Photoelectric Sensor
2. ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant
Feature
- The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega2560 r3,RoHS Compliant
- The chip is Atmega2560-16au and Atmega16u2, same with the official version.
- Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes.
- Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack)
- It contains everything needed to support the microcontroller
- simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Description
We have the manufacture factory, making productions and selling by ourselves. So we can control the quality of our productions by ourselves for you. We’d like to receive your valuable suggestions for our products and make your idea come true. This version is optimized in the original version, mainly for customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use. Microcontroller: ATmega2560 Compatible with Arduino IDE Operating Voltage: 5V Input: Voltage(recommended) : 7-12V Input Voltage (limits) : 6-20V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3. 3V Pin: 50 mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8 KB EEPROM: 4 KB Clock Speed: 16 MHz Package includes: 1 x Mega 2560 ATmega2560-16AU Board (Arduino-compatible) 1 x USB cable
3. JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM
Feature
- Equiped with high-current relay, AC250V 10A
- DC30V 10A
- 5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
- Be able to control various appliances, and other equipments with large current
- Application:Supports all MCU control, The industrial field, PLC control, Smart home control
- Indication LED’s for Relay output status
Description
5V Relay Module 4-ChannelThis is a 5V 4-Channel Relay interface board. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
4. Arduino YUN REV2 [ABX00020]
Feature
- Easy out-of-the-box configuration process through WiFi or Ethernet via the board’s Web Panel: scan your existing networks and select where your board will connect to from a drop-down list
- The two processors on the Arduino Yún rev 2 work together thanks to Arduino’s Bridge library allowing communication in both directions
- Host your own websites on the board to control physical peripherals from a browser on any external device
- You can pipe requests from the Arduino part of the board all the way to various Internet services
- Configure shield related features and change the Arduino software Over-The-Air through the Yún Web Panel
5. Arduino Nano [A000005]
Feature
- The Arduino Nano is one of the smallest Arduino boards available on the market
- Tiny form factor, complete, and breadboard-friendly board based on the ATmega328
- It works with a Mini-B USB cable
- Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users
6. HiLetgo PN532 NFC NXP RFID Module V3 Kit Near Field Communication Reader Module Kit I2C SPI HSU with S50 White Card Key Card for Arduino Raspberry Pi DIY Smart Phone Android Phone
Feature
- Support NFC RFID reading and writing, P2P communication with peers
- Support I2C, SPI and HSU (High Speed UART), easy to change among these modes
- On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Arduino Raspberry Pi compatible, Small Size and easy to embed into your project
- RFID reader/writer supports: Mifare 1k, 4k, Ultralight, and DesFire cards, ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX), Innovision Jewel cards such as IRT5001 card, FeliCa cards such as RCS_860 and RCS_854
Description
The PN532 is actually a bundle of 4 libraries: PN532, PN532_HSU, PN532_I2C and PN532_SPI. You only need 2, the main PN532.h and either the I2C or SPI depending on how you connect it. The HSU is for high speed communication, which you probably won’t need.
Important: Before getting it start, you need to install a few libraries like Don’s NDEF library, PN532 library(Seeed-Studio’s version recommanded), both of them you can find on GitHub or at below links:
Arduino Library for NFC Shield based on NXP PN532 chip:
https://github.com/jmgjmg/PN532
Arduino library for SPI and I2C access to the PN532 RFID:
https://github.com/adafruit/Adafruit-PN532
Driver for PN532 NFC chip:
https://github.com/techniq/node-pn532 Description:
1. Gilt PCB and Small dimension and easy to embed into your project
2. Support RFID reading and writing
SupportP2P communication with peers
Support NFC with Android phone 3. Typical Operating Distance have been updated to 5cm~7cm reading distance
4. Work in NFC Mode or RFID reader/writer Mode
5. RFID reader/writer supports:
1) Mifare 1k, 4k, Ultralight, and DesFire cards
2) ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
3) InnoVISION Jewel cards such as IRT5001 card
4) FeliCa cards such as RCS_860 and RCS_854
7. Plug and play, Arduino compatible
8. Built in PCB Antenna, with 4cm~6cm communication distance
9. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
10. Work as RFID reader/writer
11. Work as 1443-A card or a virtual card
12. Exchange data with other NFC devices such as smartphone
Package Incuded:
1*NXP PN532 NFC RFID Module V3 Kit
7. SunFounder Ethernet Shield W5100 for Arduino R3 Mega 2560 1280 A057
Feature
- With this Ethernet Shield, for Arduino board can be used to connect to internet.
- Can be used as server or client.
- Directly plug puzzle board, no soldering required.
- It is directly compatible with Arduino official Ethernet Library.
- It adds a micro-SD card slot, which can be used to store files for serving over the network.
Description
Features
1.With this Ethernet Shield, for Arduino board can be used to connect to internet.
2.Can be used as server or client.
3.Directly plug puzzle board, no soldering required.
4.Controller: w5100.
5.This is the latest version of the Ethernet Shield.
6.Ethernet Shield for Arduino which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get for Arduino Online.
7.It is directly compatible with Arduino official Ethernet Library.
8.It adds a micro-SD card slot, which can be used to store files for serving over the network.
9.It is compatible with Arduino Duemilanove (168 or 328), as well as Mega (1280/2560) and can be accessed using the SD library.
10.The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
11.It supports up to four simultaneous socket connections.
12.Use the Ethernet library to write sketches which connect to the internet using the shield.
13.Fits for arduino Main board,2009,, mega 1280, mega 2560.
14.Size:7cm x 5.4cm x 2.4cm – 2.76inch x 2.12inch x 0.94inch.
Package Included
1 x Ethernet Shield
8. Keywishbot Nano V3.0 Board for Arduino, Mini V3.0 USB Nano ATmega328P 5V 16M Micro Controller Board Welded Module (5PCS + 1Cable) …
Feature
- Micro-controller ATmega328P, using Atmel Atmega328P-AU MCU
- Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed.
- Support USB download and Power.
- Support for external 5V ~ 12V DC power supply.
- Support power supply by 9V battery.
- Support ISP download.
Description
Specification: -CH340G Replace FT232RL. -Operating Voltage(logic level): 5V. -8 analog inputs ports:A0 ~ A7. -14 Digital input / output ports:TX,RX,D2 ~ D13. -6 PWM ports:D3, D5, D6, D9, D10, D11. -1 pairs of TTL level serial transceiver ports RX / TX. -Support USB download and Power. -Support for external 5V ~ 12V DC power supply. -Support power supply by 9V battery. -Support ISP download. Package including: 5 x Arduino Nano V3.0 with ATMEGA328P Module (welded)
9. Arduino Nano Every (Single Board)
Feature
- Small (48mm x 18mm), robust and powerful board Based on the ATMega4809 AVR processor
- Clock 20MHz, Flash 48KB, SRAM 6KB, EEPROM 256byte.
- Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
- Power supply architecture based on a high efficiency DC-DC converter allows powering the board at up to 21V and to drive output peripherals with up to 950mA without overheating.
- Get started in minutes with thousands of sketches available in open source
Description
The Arduino Nano Every’s tiny size (48×18 mm) makes it ideal for wearable projects; in experiments, in prototypes or in a full cosplay setup! Sensors and motors can be connected without too much fuss which means it’s great for robotics, drones and 3D printing too. Flexible to the requirements of your design, it can be used as a breadboard when mounting pin headers, or s a SMT directly soldered on a PCB thanks to its castellated pads. The Configurable Custom Logic (CCL) is a great way to get beginners more interested in hardware. We’ve used a quality USB chip so people won’t have connection or driver issues. The separate SAMD11 ARM Cortex M0+ processor handling the USB interface also makes it possible to implement different USB classes such as Human Interface Device (HID) instead of just the classic CDC/UART.
10. DaFuRui 5Pack RC522 RFID RF IC Card Sensor Module with S50 White Card and Key Ring Compatible for Arduino
Feature
- ★100% brand new and high quality RC522 RFID RF IC Card Sensor Module.
- ★This RFID-RC522 module is based on the Philips MF522-AN board and is delivered together with an S50 card, key Ring and two matching pin strips.
- ★This module can be directly loaded into the various reader molds.
- ★Applicable for the users who need to design or manufacture the RF card terminal.The development of access controls, electronic door locks or terminals for the time recording.
- ★It is supported card types: Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire.
Conclusion
By our suggestions above, we hope that you can found Infrared Long Range Arduino for you.Please don’t forget to share your experience by comment in this post. Thank you!