The Best 12 Hp Submersible Effluent Pump

Product Description

FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton. Make sure the pump electrical supply circuit is equipped with fuses or circuit breakers of proper capacity

From the Manufacturer

Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.

Product Description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91570, 1/2 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 3300 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 3/8-inch solids with ease. This pump is UL/CUL listed and CSA certified and backed by a 3 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70’s, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service – Superior Pumps Built to Last!

Product Description

1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11″ Diameter Or Larger Sump Basin. Pumps Up To 4200 GPH at 0′, Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups. This product is assembled in the USA. Easy installation and easy handling.

Amazon.com

The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.

See all Product description

Product Description

Liberty Pumps 257 is a 1/3HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 10ft power cord. Turn-on level of the not adjustable switch is 7″ and turn-off level is 3-1/2″. This pump can operate in a smaller 10″ diameter sump pit.The Liberty Pumps 257 has 1-1/2″ NPT discharge, 1/2″ solids-handling, 18′ shut-off head, a unique one-piece cast iron housing and thermally protected permanently lubricated motor.For Sump and De-watering Applications only. This Vertical Magnetic Float (VMF) model is not recommended for effluent applications due to their short On/Off cycle. Wide angle float models (Liberty Pumps 251 and 253) are better suited for effluent applications and are easily adjustable for different On/Off levels.For added protection, consider the addition of a back-up pump such as Liberty’s SJ10 SumpJet, as well as an alarm such as Liberty’s ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.CAUTION Do not let the pump run dry.

From the Manufacturer

Rugged and dependable heavy-duty cast iron pump with powder coat finish. Liberty’s “workhorse” sump pump features a unique one-piece cast iron body, 10-Foot quick-disconnect power cord. With a durable, epoxy powder coat finish and vortex style impeller, Liberty’s 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering. This sump pump is for sump pits no less than 10-Inch in diameter.

Product Description

Wayne’s RPP50 1/2 hp sewage pump, pumps up to 6200 gallons per hour with 5 feet of lift. This pump is manufactured with a durable cast iron motor and pump housing and a replaceable piggyback tether switch for automatic or manual operation. The RPP50 is capable of passing 2 inch solids, and is perfect and ideal for below grade installations.

From the Manufacturer

The Wayne RPP50 1/2-Horsepower cast iron sewage pump with tether switch pumps up to 6200-Gallon per hour with 5-Feet of lift. This pump is manufactured with a durable cast iron motor and pump housing with a replaceable piggyback tether switch for automatic operation. The RPP50 is capable of passing 2-Inch solids. This pump is ideal for basement or below grade installations.

Product Description

1/2 hp, submersible, non-clogging, vortex design utility pump, pumps up to 2500 gph at 0′, corrosion resistant reinforced thermoplastic housing, volute & impeller, bottom suction design filters debris & removes water down to 1/4 inch of surface, passes up to 1/2 inch solids, 1 1/4 inch nps high volume discharge with 3/4 inch Garden hose Adapter, easy access handle for portability. This product is assembled in the USA.Easy installation and easy handling.

Amazon.com

The Wayne 1/2 HP 2,500 GPH submersible utility water pump can handle material up to 1/2-inch thick without getting clogged. It can pump out 2500 gallons per hour, with a bottom suction that takes out water to within an eighth of an inch of the surface. Glass reinforced thermoplastic for the housing, volute, and impeller prevents rust, the 3/4-inch adjustable discharge adapter easily connects to garden hoses, and an easy-access handle provides complete portability. Wayne backs its pump with a one-year limited warranty.

Product Description

This product is high quality product and highly durable. This is easy to use and easy to install. This product is manufactured in United States.

From the Manufacturer

When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.